Page Comparison

TIP JOSIF Main Page] |TIP JOSIF Framework | TIP Soap Generator | TIP Soap Generator Mapping Rules - Part IX

Table of Contents

outline	true
indent	20px
style	none
printable	false

Only in JOSIF V1.1.

Common operations cover create, delete, set and get applied to a single entity class.

They define patterns and signatures for each of these operations. Those operations are defined using tipEntityXxx stereotypes on the corresponding entity artifact, where Xxx is the name of the operation. These stereotypes are defined in the TIP _ Profile.

The SOAP generator, based on the values of the attributes of each stereotype, will generate the corresponding common operation XSD and WSDL.

...

This common operation is defined by the stereotype tipEntityCreate that describes the various attributes used to configure this operation.
There will be at maximum one create operation per object type that will be created automatically by the Tigerstripe generators. Only one object will be created at a time.

...

This is defined by the attribute settableAtCreation of the the tipAttribute stereotype.

The object name would be in createData in the case of autonaming.

...

The following example from the RAM interface shows the XML and WSDL generated for this directive:

Panel

Code Block


 <xsd:element name="createResourceAlarmRequest">
    <xsd:annotation>
      <xsd:documentation> The createResourceAlarm request message XML schema. </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="referenceObject" type="entity:EntityIdentifier" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>It specifies an existing instance of a ResourceAlarm.</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 0..1</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by id</p>
              <p>This parameter is optional</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="createData" type="tns:CreateDataForResourceAlarm" minOccurs="1"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>create data using the datatype generated</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 1</p>
              <p>This parameter is unique</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block


  <xsd:element name="createResourceAlarmResponse">
    <xsd:annotation>
      <xsd:documentation>
        <p>The createResourceAlarm response message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="createdObject" type="tns:ResourceAlarm" minOccurs="1" maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>created ResourceAlarm</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 1</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="createResourceAlarmException">
    <xsd:annotation>
      <xsd:documentation>
        <p>The createResourceAlarm exception message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:choice>
        <xsd:element name="duplicate" type="exceptions1:Duplicate">
          <xsd:annotation>
            <xsd:documentation>
              <p/>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="capacityExceeded" type="exceptions1:CapacityExceeded">
          <xsd:annotation>
            <xsd:documentation>
              <p/>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="accessDenied" type="exceptions:AccessDenied"/>
        <xsd:element name="communicationLoss" type="exceptions:CommunicationLoss"/>
        <xsd:element name="internalError" type="exceptions:InternalError"/>
        <xsd:element name="invalidInput" type="exceptions:InvalidInput"/>
        <xsd:element name="notImplemented" type="exceptions:NotImplemented"/>
        <xsd:element name="unableToComply" type="exceptions:UnableToComply"/>
      </xsd:choice>
    </xsd:complexType>
  </xsd:element>

The CreateDataForResourceAlarm type contains all the settable attributes:

Panel

Code Block


<xsd:complexType name="CreateDataForResourceAlarm">
    <xsd:sequence>
      <xsd:element name="alarmType" type="tns:AlarmType" minOccurs="0" maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>
            <p>Categorizes the alarm. This attribute needs to be supported in the Simple Alarm
              Reporting profile.</p>
            <p>This attribute has multiplicity 0..1</p>
            <p>This attribute is optional</p>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="perceivedSeverity" type="tns:PerceivedSeverity" minOccurs="0" maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>
            <p>Lists the possible severities that can be allocated to an Alarm. The values are
              consistent with ITU-T Recommendation X.733. Once an alarm has been cleared, its
              perceived severity is set to Cleared and can no longer be set. This attribute needs to
              be supported in the Simple Alarm Reporting profile.</p>
            <p>This attribute has multiplicity 0..1</p>
            <p>This attribute is optional</p>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      ...........
      ...........
      <xsd:element name="securityServiceUser" type="xsd:string" minOccurs="0" maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>
            <p>Identifies the service user whose request for service led to the generation of the
              security alarm.</p>
            <p>This attribute has multiplicity 0..1</p>
            <p>This attribute is optional</p>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
  </xsd:complexType>

Code Block

  <wsdl:message name="createResourceAlarmRequest">
        <wsdl:documentation>
            <p>The createResourceAlarm request message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:createResourceAlarmRequest"/>
    </wsdl:message>
    <wsdl:message name="createResourceAlarmResponse">
        <wsdl:documentation>
            <p>The createResourceAlarm response message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:createResourceAlarmResponse"/>
    </wsdl:message>
    <wsdl:message name="createResourceAlarmException">
        <wsdl:documentation>
            <p>The createResourceAlarm exception message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:createResourceAlarmException"/>
    </wsdl:message>

the operation within a portType:

Panel

Code Block


<wsdl:portType name="ResourceAlarmInterface">
<wsdl:operation name="createResourceAlarm">
            <wsdl:documentation>
                <p>This is the Create common request-response operation.</p>
            </wsdl:documentation>
            <wsdl:input name="createResourceAlarmRequest" message="tns:createResourceAlarmRequest"/>
            <wsdl:output name="createResourceAlarmResponse"
                message="tns:createResourceAlarmResponse"/>
            <wsdl:fault name="createResourceAlarmException"
                message="tns:createResourceAlarmException"/>
        </wsdl:operation>
</wsdl:portType>

and the binding of a portType:

Panel

Code Block

  <!-- Binding - Concrete Service Interface deployment SOAP/HTTP -->
    <wsdl:binding name="ResourceAlarmInterfaceSoapHttpBinding" type="tns:ResourceAlarmInterface">
        <wsdl:documentation>
            <p>Web Service (SOAP/HTTP) profile binding definitions.</p>
        </wsdl:documentation>
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="createResourceAlarm">
            <soap:operation soapAction="createResourceAlarm" style="document"/>
            <wsdl:input name="createResourceAlarmRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="createResourceAlarmResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="createResourceAlarmException">
                <soap:fault name="createResourceAlarmException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>
</wsdl:binding>

...

This common operation is defined by the stereotype stereotype tipEntityDelete that describes the various attributes used to configure this operation.

...

The following example from the RAM interface shows the XML and WSDL generated for this directive:

Panel

Code Block


<xsd:element name="deleteResourceAlarmsRequest">
    <xsd:annotation>
      <xsd:documentation>
        <p>The deleteResourceAlarms request message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="objectsToDelete" type="entity:ArrayOfEntityIdentifier" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>Filter to be used</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 1..*</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="deleteResourceAlarmsResponse">
    <xsd:annotation>
      <xsd:documentation>
        <p>The deleteResourceAlarms response message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="failedIds" type="entity:ArrayOfEntityIdentifier" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>failed objects that could not be deleted (by id)</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 0..*</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is bulk potential</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block


  <xsd:element name="deleteResourceAlarmsException">
    <xsd:annotation>
      <xsd:documentation>
        <p>The "deleteResourceAlarmsException" exception message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:choice>
        <xsd:element name="accessDenied" type="exceptions:AccessDenied"/>
        <xsd:element name="communicationLoss" type="exceptions:CommunicationLoss"/>
        <xsd:element name="internalError" type="exceptions:InternalError"/>
        <xsd:element name="invalidInput" type="exceptions:InvalidInput"/>
        <xsd:element name="notImplemented" type="exceptions:NotImplemented"/>
        <xsd:element name="unableToComply" type="exceptions:UnableToComply"/>
      </xsd:choice>
    </xsd:complexType>
  </xsd:element>

and in the WSDL the messages:

Code Block


  <wsdl:message name="deleteResourceAlarmsRequest">
        <wsdl:documentation>
            <p>The deleteResourceAlarms request message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:deleteResourceAlarmsRequest"/>
    </wsdl:message>
    <wsdl:message name="deleteResourceAlarmsResponse">
        <wsdl:documentation>
            <p>The deleteResourceAlarms response message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:deleteResourceAlarmsResponse"/>
    </wsdl:message>
    <wsdl:message name="deleteResourceAlarmsException">
        <wsdl:documentation>
            <p>The deleteResourceAlarms exception message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:deleteResourceAlarmsException"/>
    </wsdl:message>

the operation within a portType:

Panel

Code Block


<wsdl:portType name="ResourceAlarmInterface">
  <wsdl:operation name="deleteResourceAlarms">
            <wsdl:documentation>
                <p>This is the Delete common request-response operation.</p>
            </wsdl:documentation>
            <wsdl:input name="deleteResourceAlarmsRequest" message="tns:deleteResourceAlarmsRequest"/>
            <wsdl:output name="deleteResourceAlarmsResponse"
                message="tns:deleteResourceAlarmsResponse"/>
            <wsdl:fault name="deleteResourceAlarmsException"
                message="tns:deleteResourceAlarmsException"/>
        </wsdl:operation>
</wsdl:portType>

and the binding of a portType:

Panel

Code Block

  <!-- Binding - Concrete Service Interface deployment SOAP/HTTP -->
    <wsdl:binding name="ResourceAlarmInterfaceSoapHttpBinding" type="tns:ResourceAlarmInterface">
        <wsdl:documentation>
            <p>Web Service (SOAP/HTTP) profile binding definitions.</p>
        </wsdl:documentation>
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="deleteResourceAlarms">
            <soap:operation soapAction="deleteResourceAlarms" style="document"/>
            <wsdl:input name="deleteResourceAlarmsRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="deleteResourceAlarmsResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="deleteResourceAlarmsException">
                <soap:fault name="deleteResourceAlarmsException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>

</wsdl:binding>

...

This common operation is defined by the stereotype stereotype tipEntityGet that describes the various attributes used to configure this operation.

...

The following example from the RAM interface shows the XML and WSDL generated for this directive:

Panel

Code Block


<xsd:element name="getResourceAlarmRequest">
    <xsd:annotation>
      <xsd:documentation> The getResourceAlarm request message XML schema. </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="objectToGet" type="entity:EntityIdentifier" minOccurs="1" maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>ResourceAlarm to return. Passed by id</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 1</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by id</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="getResourceAlarmResponse">
    <xsd:annotation>
      <xsd:documentation>
        <p>The getResourceAlarm response message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="resourceAlarm" type="tns:ResourceAlarm" minOccurs="1" maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>ResourceAlarm being returned</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 1</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="getResourceAlarmException">
    <xsd:annotation>
      <xsd:documentation>
        <p>The "getResourceAlarmException" exception message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:choice>
        <xsd:element name="entityNotFound" type="exceptions1:EntityNotFound">
          <xsd:annotation>
            <xsd:documentation>
              <p/>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="accessDenied" type="exceptions:AccessDenied"/>
        <xsd:element name="communicationLoss" type="exceptions:CommunicationLoss"/>
        <xsd:element name="internalError" type="exceptions:InternalError"/>
        <xsd:element name="invalidInput" type="exceptions:InvalidInput"/>
        <xsd:element name="notImplemented" type="exceptions:NotImplemented"/>
        <xsd:element name="unableToComply" type="exceptions:UnableToComply"/>
      </xsd:choice>
    </xsd:complexType>
  </xsd:element>

Code Block

    <wsdl:message name="getResourceAlarmRequest">
        <wsdl:documentation>
            <p>The getResourceAlarm request message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmRequest"/>
    </wsdl:message>
    <wsdl:message name="getResourceAlarmResponse">
        <wsdl:documentation>
            <p>The getResourceAlarm response message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmResponse"/>
    </wsdl:message>
    <wsdl:message name="getResourceAlarmException">
        <wsdl:documentation>
            <p>The getResourceAlarm exception message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmException"/>
    </wsdl:message>

the operation within a portType:

Panel

Code Block


<wsdl:portType name="ResourceAlarmInterface">
   <wsdl:operation name="getResourceAlarm">
            <wsdl:documentation>
                <p>This is the Get common request-response operation.</p>
            </wsdl:documentation>
            <wsdl:input name="getResourceAlarmRequest" message="tns:getResourceAlarmRequest"/>
            <wsdl:output name="getResourceAlarmResponse" message="tns:getResourceAlarmResponse"/>
            <wsdl:fault name="getResourceAlarmException" message="tns:getResourceAlarmException"/>
        </wsdl:operation>
</wsdl:portType>

and the binding of a portType:

Panel

Code Block

  <!-- Binding - Concrete Service Interface deployment SOAP/HTTP -->
    <wsdl:binding name="ResourceAlarmInterfaceSoapHttpBinding" type="tns:ResourceAlarmInterface">
        <wsdl:documentation>
            <p>Web Service (SOAP/HTTP) profile binding definitions.</p>
        </wsdl:documentation>
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 
        <wsdl:operation name="getResourceAlarm">
            <soap:operation soapAction="getResourceAlarm" style="document"/>
            <wsdl:input name="getResourceAlarmRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="getResourceAlarmResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="getResourceAlarmException">
                <soap:fault name="getResourceAlarmException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>

</wsdl:binding>

...

This common operation is defined by the stereotype tipEntityGetMuliple stereotype tipEntityGetMultiple that describes the various attributes used to configure this operation.

...

getThingIds will be generated if the value of the attribute ‘’getType’’ of the tipEntityGetMuliple the tipEntityGetMultiple stereotype is id or 'both'.

The values of the objects are returned by ids, as a set of EntityIdentifiers.

...

The following example from the RAM interface shows the XML and WSDL generated for this directive:

Panel

Code Block


 <xsd:element name="getResourceAlarmIdsRequest">
    <xsd:annotation>
      <xsd:documentation> The getResourceAlarmIds request message XML schema. </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="filter" type="tns:ResourceAlarmFilterChoice" minOccurs="0" maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>Filter to be used</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 1..*</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block


  <xsd:element name="getResourceAlarmIdsResponse">
    <xsd:annotation>
      <xsd:documentation>
        <p>The getResourceAlarmIds response message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="resourceAlarmIds" type="entity:ArrayOfEntityIdentifier" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>resourceAlarm</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 0..*</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by id</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="getResourceAlarmIdsException">
    <xsd:annotation>
      <xsd:documentation>
        <p>The "getResourceAlarmIdsException" exception message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:choice>
        <xsd:element name="filterNotSupported" type="exceptions1:FilterNotSupported"/>
        <xsd:element name="accessDenied" type="exceptions:AccessDenied"/>
        <xsd:element name="communicationLoss" type="exceptions:CommunicationLoss"/>
        <xsd:element name="internalError" type="exceptions:InternalError"/>
        <xsd:element name="invalidInput" type="exceptions:InvalidInput"/>
        <xsd:element name="notImplemented" type="exceptions:NotImplemented"/>
        <xsd:element name="unableToComply" type="exceptions:UnableToComply"/>
      </xsd:choice>
    </xsd:complexType>
  </xsd:element>

Code Block

   <wsdl:message name="getResourceAlarmIdsRequest">
        <wsdl:documentation>
            <p>The getResourceAlarmIds request message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmIdsRequest"/>
    </wsdl:message>
    <wsdl:message name="getResourceAlarmIdsResponse">
        <wsdl:documentation>
            <p>The getResourceAlarmIds response message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmIdsResponse"/>
    </wsdl:message>
    <wsdl:message name="getResourceAlarmIdsException">
        <wsdl:documentation>
            <p>The getResourceAlarmIds exception message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmIdsException"/>
    </wsdl:message>

the operation within a portType:

Panel

Code Block


<wsdl:portType name="ResourceAlarmInterface">
  <wsdl:operation name="getResourceAlarmIds">
            <soap:operation soapAction="getResourceAlarmIds" style="document"/>
            <wsdl:input name="getResourceAlarmIdsRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="getResourceAlarmIdsResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="getResourceAlarmIdsException">
                <soap:fault name="getResourceAlarmIdsException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>
</wsdl:portType>

and the binding of a portType:

Panel

Code Block

  <!-- Binding - Concrete Service Interface deployment SOAP/HTTP -->
    <wsdl:binding name="ResourceAlarmInterfaceSoapHttpBinding" type="tns:ResourceAlarmInterface">
        <wsdl:documentation>
            <p>Web Service (SOAP/HTTP) profile binding definitions.</p>
        </wsdl:documentation>
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
        <wsdl:operation name="getResourceAlarmIds">
            <soap:operation soapAction="getResourceAlarmIds" style="document"/>
            <wsdl:input name="getResourceAlarmIdsRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="getResourceAlarmIdsResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="getResourceAlarmIdsException">
                <soap:fault name="getResourceAlarmIdsException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>
</wsdl:binding>

...

getThings will be generated if the value of the attribute ‘’getType’’ of the tipEntityGetMuliple the tipEntityGetMultiple stereotype is value or both.

...

For example in the RAM interface:

Panel

Code Block


<xsd:complexType name="ResourceAlarmResultWithIterator">
    <xsd:sequence>
      <xsd:element name="result" type="tns:ArrayOfResourceAlarm"/>
      <xsd:element name="iterator" type="iterator:IteratorInfo"/>
    </xsd:sequence>
</xsd:complexType>

...

The following example from the RAM interface shows the XML and WSDL generated for this directive:

Panel

Code Block


<xsd:element name="getResourceAlarmsRequest">
    <xsd:annotation>
      <xsd:documentation>
        <p>The getResourceAlarms request message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:complexContent>
        <xsd:extension base="iterator:CommonRequest">
          <xsd:sequence>
            <xsd:element name="filter" type="tns:ResourceAlarmFilterChoice" minOccurs="0"
              maxOccurs="1">
              <xsd:annotation>
                <xsd:documentation>
                  <p>Template or XPATH filter</p>
                  <p>This parameter is input parameter</p>
                  <p>This parameter has multiplicity 1</p>
                  <p>This parameter is unique</p>
                  <p>This parameter is mandatory</p>
                </xsd:documentation>
              </xsd:annotation>
            </xsd:element>
            <xsd:element name="attributeSelector" type="primitives:ArrayOfString" minOccurs="0"
              maxOccurs="1">
              <xsd:annotation>
                <xsd:documentation>
                  <p>Allow to specify which attributes to return. It allows to return only a subset
                    of the object instead of the full object. If empty, the full object is
                    returned.</p>
                  <p>This parameter is input parameter</p>
                  <p>This parameter has multiplicity 0..*</p>
                  <p>This parameter is unique</p>
                  <p>This parameter is optional</p>
                </xsd:documentation>
              </xsd:annotation>
            </xsd:element>
            <xsd:element name="extensionInfo" minOccurs="0">
              <xsd:annotation>
                <xsd:documentation> a generic list of any type of elements. Used for vendor
                  extensions or loose element encapsulation from other namespaces.
                </xsd:documentation>
              </xsd:annotation>
              <xsd:complexType>
                <xsd:sequence>
                  <xsd:any namespace="##any" processContents="lax" minOccurs="0"
                    maxOccurs="unbounded"/>
                </xsd:sequence>
              </xsd:complexType>
            </xsd:element>
          </xsd:sequence>
        </xsd:extension>
      </xsd:complexContent>
    </xsd:complexType>
  </xsd:element>

Code Block


  <xsd:element name="getResourceAlarmsResponse">
    <xsd:annotation>
      <xsd:documentation>
        <p>The getThings response message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="ResourceAlarms" type="tns:ResourceAlarmResultWithIterator" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>objects being returned. By iterator.</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 0..*</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is bulk potential</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="getResourceAlarmsException">
    <xsd:annotation>
      <xsd:documentation>
        <p>The "getResourceAlarmsException" exception message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:choice>
        <xsd:element name="filterNotSupported" type="exceptions1:FilterNotSupported"/>
        <xsd:element name="accessDenied" type="exceptions:AccessDenied"/>
        <xsd:element name="communicationLoss" type="exceptions:CommunicationLoss"/>
        <xsd:element name="internalError" type="exceptions:InternalError"/>
        <xsd:element name="invalidInput" type="exceptions:InvalidInput"/>
        <xsd:element name="notImplemented" type="exceptions:NotImplemented"/>
        <xsd:element name="unableToComply" type="exceptions:UnableToComply"/>
      </xsd:choice>
    </xsd:complexType>
  </xsd:element>

Code Block

   <wsdl:message name="getResourceAlarmsRequest">
        <wsdl:documentation>
            <p>The getResourceAlarms request message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmsRequest"/>
    </wsdl:message>
    <wsdl:message name="getResourceAlarmsResponse">
        <wsdl:documentation>
            <p>The getResourceAlarms response message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmsResponse"/>
    </wsdl:message>
    <wsdl:message name="getResourceAlarmsException">
        <wsdl:documentation>
            <p>The getResourceAlarms exception message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:getResourceAlarmsException"/>
    </wsdl:message>

the operation within a portType:

Panel

Code Block


<wsdl:portType name="ResourceAlarmInterface">
  <wsdl:operation name="getResourceAlarms">
            <soap:operation soapAction="getResourceAlarms" style="document"/>
            <wsdl:input name="getResourceAlarmsRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="getResourceAlarmsResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="getResourceAlarmsException">
                <soap:fault name="getResourceAlarmsException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>
</wsdl:portType>

and the binding of a portType:

Panel

Code Block

  <!-- Binding - Concrete Service Interface deployment SOAP/HTTP -->
    <wsdl:binding name="ResourceAlarmInterfaceSoapHttpBinding" type="tns:ResourceAlarmInterface">
        <wsdl:documentation>
            <p>Web Service (SOAP/HTTP) profile binding definitions.</p>
        </wsdl:documentation>
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
        <wsdl:operation name="getResourceAlarms">
            <soap:operation soapAction="getResourceAlarms" style="document"/>
            <wsdl:input name="getResourceAlarmsRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="getResourceAlarmsResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="getResourceAlarmsException">
                <soap:fault name="getResourceAlarmsException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>

</wsdl:binding>

...

This common operation is defined by the stereotype tipEntitySet that describes the various attributes used to configure this operation.

...

The following example from the RAM interface shows the XML and WSDL generated for this directive:

Panel

Code Block

  <xsd:element name="setResourceAlarmRequest">
    <xsd:annotation>
      <xsd:documentation> The setResourceAlarm request message XML schema. </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="objectToSet" type="entity:EntityIdentifier" minOccurs="1" maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>object to Set, passed as an Entity Identifier</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 1</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by id</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="valuesToBeSet" type="tns:SetDataForResourceAlarm" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>Xalues to be set, using datatype built by generators. Note that at least one of the
                parameters valuesToBeSet, valuesToAdd and valuesToRemove should be present.</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 0..1</p>
              <p>This parameter is unique</p>
              <p>This parameter is optional</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="valuesToAdd" type="tns:AddDataForResourceAlarm" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>Values to add, using datatype built by generators. Note that at least one of the
                parameters valuesToBeSet, valuesToAdd and valuesToRemove should be present.</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 0..1</p>
              <p>This parameter is unique</p>
              <p>This parameter is optional</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="valuesToRemove" type="tns:RemoveDataForResourceAlarm" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>Values to remove, using datatype built by generators. Note that at least one of the
                parameters valuesToBeSet, valuesToAdd and valuesToRemove should be present.</p>
              <p>This parameter is input parameter</p>
              <p>This parameter has multiplicity 0..1</p>
              <p>This parameter is unique</p>
              <p>This parameter is optional</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="setResourceAlarmResponse">
    <xsd:annotation>
      <xsd:documentation>
        <p>The setResourceAlarm response message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="modifiedObject" type="tns:ResourceAlarm" minOccurs="1" maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>modified object by value</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 1</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is mandatory</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="setResourceAlarmException">
    <xsd:annotation>
      <xsd:documentation>
        <p>The setResourceAlarm exception message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:choice>
        <xsd:element name="notInValidState" type="exceptions1:NotInValidState">
          <xsd:annotation>
            <xsd:documentation>
              <p/>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="entityNotFound" type="exceptions1:EntityNotFound">
          <xsd:annotation>
            <xsd:documentation>
              <p/>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="accessDenied" type="exceptions:AccessDenied"/>
        <xsd:element name="communicationLoss" type="exceptions:CommunicationLoss"/>
        <xsd:element name="internalError" type="exceptions:InternalError"/>
        <xsd:element name="invalidInput" type="exceptions:InvalidInput"/>
        <xsd:element name="notImplemented" type="exceptions:NotImplemented"/>
        <xsd:element name="unableToComply" type="exceptions:UnableToComply"/>
      </xsd:choice>
    </xsd:complexType>
  </xsd:element>

Panel

Code Block

     <wsdl:message name="setResourceAlarmRequest">
        <wsdl:documentation>
            <p>The setResourceAlarm request message.</p>
        </wsdl:documentation>
        <wsdl:part
            name="body"
            element="tns:setResourceAlarmRequest" />
    </wsdl:message>
    <wsdl:message name="setResourceAlarmResponse">
        <wsdl:documentation>
            <p>The setResourceAlarm response message.</p>
        </wsdl:documentation>
        <wsdl:part
          name="body"
          element="tns:setResourceAlarmResponse" />
    </wsdl:message>
        <wsdl:message name="setResourceAlarmException">
        <wsdl:documentation>
            <p>The setResourceAlarm exception message.</p>
        </wsdl:documentation>
        <wsdl:part
          name="body"
          element="tns:setResourceAlarmException" />
        </wsdl:message>

the operation within a portType:

Panel

Code Block


<wsdl:portType name="ResourceAlarmInterface">
  <wsdl:operation name="setResourceAlarm">
            <soap:operation soapAction="setResourceAlarm" style="document"/>
            <wsdl:input name="setResourceAlarmRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="setResourceAlarmResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="setResourceAlarmException">
                <soap:fault name="setResourceAlarmException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>
</wsdl:portType>

and the binding of a portType:

Panel

Code Block


 <!-- Binding - Concrete Service Interface deployment SOAP/HTTP -->
    <wsdl:binding name="ResourceAlarmInterfaceSoapHttpBinding" type="tns:ResourceAlarmInterface">
        <wsdl:documentation>
            <p>Web Service (SOAP/HTTP) profile binding definitions.</p>
        </wsdl:documentation>
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="setResourceAlarm">
            <soap:operation soapAction="setResourceAlarm" style="document"/>
            <wsdl:input name="setResourceAlarmRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="setResourceAlarmResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="setResourceAlarmException">
                <soap:fault name="setResourceAlarmException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>

</wsdl:binding>

...

This common operation is defined by the stereotype tipEntitySetMuliple stereotype tipEntitySetMultiple that describes the various attributes used to configure this operation.

...

setThings will be generated if the value of the attribute ‘’isAtomic’’ of the tipEntitySetMuliple the tipEntitySetMultiple stereotype is false.

Best effort only applies at the entire object level, i.e., either all the request attributes for an given object are set or not.

...

The following example from the RAM interface shows the XML and WSDL generated for this directive:

Panel

Code Block

  <xsd:element name="setResourceAlarmsRequest">
    <xsd:annotation>
      <xsd:documentation>
        <p>The setResourceAlarms request message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:complexContent>
        <xsd:extension base="iterator:CommonRequest">
          <xsd:sequence>
            <xsd:element name="filter" type="tns:ResourceAlarmFilterChoice" minOccurs="0"
              maxOccurs="1">
              <xsd:annotation>
                <xsd:documentation>
                  <p>Template or XPATH filter</p>
                  <p>This parameter is input parameter</p>
                  <p>This parameter has multiplicity 1</p>
                  <p>This parameter is unique</p>
                  <p>This parameter is mandatory</p>
                </xsd:documentation>
              </xsd:annotation>
            </xsd:element>
            <xsd:element name="valuesToBeSet" type="tns:SetDataForResourceAlarm" minOccurs="0"
              maxOccurs="1">
              <xsd:annotation>
                <xsd:documentation>
                  <p>Values to be set, using datatype built by generators. Note that at least one of
                    the parameters valuesToBeSet, valuesToAdd and valuesToRemove should be
                    present.</p>
                  <p>This parameter is input parameter</p>
                  <p>This parameter has multiplicity 0..1</p>
                  <p>This parameter is unique</p>
                  <p>This parameter is optional</p>
                </xsd:documentation>
              </xsd:annotation>
            </xsd:element>
            <xsd:element name="valuesToAdd" type="tns:AddDataForResourceAlarm" minOccurs="0"
              maxOccurs="1">
              <xsd:annotation>
                <xsd:documentation>
                  <p>Values to add, using datatype built by generators. Note that at least one of
                    the parameters valuesToBeSet, valuesToAdd and valuesToRemove should be
                    present.</p>
                  <p>This parameter is input parameter</p>
                  <p>This parameter has multiplicity 0..1</p>
                  <p>This parameter is unique</p>
                  <p>This parameter is optional</p>
                </xsd:documentation>
              </xsd:annotation>
            </xsd:element>
            <xsd:element name="valuesToRemove" type="tns:AddDataForResourceAlarm" minOccurs="0"
              maxOccurs="1">
              <xsd:annotation>
                <xsd:documentation>
                  <p>Values to remove, using datatype built by generators. Note that at least one of
                    the parameters valuesToBeSet, valuesToAdd and valuesToRemove should be
                    present.</p>
                  <p>This parameter is input parameter</p>
                  <p>This parameter has multiplicity 0..1</p>
                  <p>This parameter is unique</p>
                  <p>This parameter is optional</p>
                </xsd:documentation>
              </xsd:annotation>
            </xsd:element>
            <xsd:element name="extensionInfo" minOccurs="0">
              <xsd:annotation>
                <xsd:documentation> a generic list of any type of elements. Used for vendor
                  extensions or loose element encapsulation from other namespaces.
                </xsd:documentation>
              </xsd:annotation>
              <xsd:complexType>
                <xsd:sequence>
                  <xsd:any namespace="##any" processContents="lax" minOccurs="0"
                    maxOccurs="unbounded"/>
                </xsd:sequence>
              </xsd:complexType>
            </xsd:element>
          </xsd:sequence>
        </xsd:extension>
      </xsd:complexContent>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="setResourceAlarmsResponse">
    <xsd:annotation>
      <xsd:documentation>
        <p>The setResourceAlarms response message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="modifiedObjects" type="tns:ResourceAlarmResultWithIterator" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>modified alarms by value.</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 0..*</p>
              <p>This parameter is ordered</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by value</p>
              <p>This parameter is bulk potential</p>
              <p>This parameter is optional</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="failedIds" type="entity:ArrayOfEntityIdentifier" minOccurs="0"
          maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>
              <p>failed alarms that could not be set (by id)</p>
              <p>This parameter is output parameter</p>
              <p>This parameter has multiplicity 0..*</p>
              <p>This parameter is unique</p>
              <p>This parameter is passed by id</p>
              <p>This parameter is optional</p>
            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="extensionInfo" minOccurs="0">
          <xsd:annotation>
            <xsd:documentation> a generic list of any type of elements. Used for vendor extensions
              or loose element encapsulation from other namespaces. </xsd:documentation>
          </xsd:annotation>
          <xsd:complexType>
            <xsd:sequence>
              <xsd:any namespace="##any" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
  </xsd:element>

Code Block

   <xsd:element name="setResourceAlarmsException">
    <xsd:annotation>
      <xsd:documentation>
        <p>The setResourceAlarms exception message XML schema.</p>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
      <xsd:choice>
        <xsd:element name="filterNotSupported" type="exceptions1:FilterNotSupported"/>
        <xsd:element name="accessDenied" type="exceptions:AccessDenied"/>
        <xsd:element name="communicationLoss" type="exceptions:CommunicationLoss"/>
        <xsd:element name="internalError" type="exceptions:InternalError"/>
        <xsd:element name="invalidInput" type="exceptions:InvalidInput"/>
        <xsd:element name="notImplemented" type="exceptions:NotImplemented"/>
        <xsd:element name="unableToComply" type="exceptions:UnableToComply"/>
      </xsd:choice>
    </xsd:complexType>
  </xsd:element>

Code Block

   <wsdl:message name="setResourceAlarmsRequest">
        <wsdl:documentation>
            <p>The setResourceAlarms request message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:setResourceAlarmsRequest"/>
    </wsdl:message>
    <wsdl:message name="setResourceAlarmsResponse">
        <wsdl:documentation>
            <p>The setResourceAlarms response message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:setResourceAlarmsResponse"/>
    </wsdl:message>
    <wsdl:message name="setResourceAlarmsException">
        <wsdl:documentation>
            <p>The setResourceAlarms exception message.</p>
        </wsdl:documentation>
        <wsdl:part name="body" element="tns:setResourceAlarmsException"/>
    </wsdl:message>

the operation within a portType:

Panel

Code Block


<wsdl:portType name="ResourceAlarmInterface">
         <wsdl:operation name="setResourceAlarms">
            <soap:operation soapAction="setResourceAlarms" style="document"/>
            <wsdl:input name="setResourceAlarmsRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="setResourceAlarmsResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="setResourceAlarmsException">
                <soap:fault name="setResourceAlarmsException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>
</wsdl:portType>

and the binding of a portType:

Panel

Code Block


 <!-- Binding - Concrete Service Interface deployment SOAP/HTTP -->
    <wsdl:binding name="ResourceAlarmInterfaceSoapHttpBinding" type="tns:ResourceAlarmInterface">
        <wsdl:documentation>
            <p>Web Service (SOAP/HTTP) profile binding definitions.</p>
        </wsdl:documentation>
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="setResourceAlarms">
            <soap:operation soapAction="setResourceAlarms" style="document"/>
            <wsdl:input name="setResourceAlarmsRequest">
                <soap:body use="literal"/>
            </wsdl:input>
            <wsdl:output name="setResourceAlarmsResponse">
                <soap:body use="literal"/>
            </wsdl:output>
            <wsdl:fault name="setResourceAlarmsException">
                <soap:fault name="setResourceAlarmsException" use="literal"/>
            </wsdl:fault>
        </wsdl:operation>

</wsdl:binding>

...

setThingsAtomic will be generated if the value of the attribute ‘’isAtomic’’ of the tipEntitySetMuliple the tipEntitySetMultiple stereotype is true.

Note that setThingsAtomic is not yet implemented in JOSIF V1.1. Refer to mantis bug 505. This will be fixed in JOSIF V1.2

Versions Compared

Old Version 27

New Version Current

Key